ASSEMBLY AND DISASSEMBLY
Whether cleaning the mask or dismantling parts for travel, the Eson 2 cushion, swivel, and diffuser are intended for assembly and disassembly. Insert the round, plastic opening on the cushion into the round opening in the middle of the mask frame and turn it to lock in place. The diffuser clips onto the top of the mask elbow, while the swivel attaches to the bottom of the elbow to connect the hose to the CPAP mask.
The headgear and headgear clips are also easily removed and assembled. Place the grey headgear straps through the headgear clips and close the connection by applying the hook and loop fastener to the strap. Then, thread the pale blue straps through the back of the forehead support’s slim opening. Then, wrap the strap over the opening so the hook and loop closure falls onto the strap for easy closure.
HOW DO I FIND THE RIGHT FIT?
With the goal of obtaining a comfortable and secure seal, the mask must be pulled over the head and then adjusted.
- With one hand hold the mask in place over the face and with the other hand, lift, pull, and place the hook and loop fastener on the blue straps until the perfect amount of tension is felt.
- Continue this step with the lower, grey straps found on either side of the mask frame.
- If further adjustments are needed, lift the two hook and loop closures found on the crown of the head and slide the material through the opening to increase or decrease tension.
Note: The blue headgear straps need to lie above the ears when resting on the forehead.
WHERE IS THE SIZE?
The Eson 2 mask frame is one size and accommodates all Eson 2 cushions. Therefore; a size is not located on the mask frame.
HEADGEAR SIZING: Anyone ordering the small mask cushion will receive the small-sized headgear. Anyone ordering the medium or large mask cushion will receive medium / large headgear.
An indention found at the top of the cushion extends downward and has a clear letter embossed on either side of the silicone. The letter “S” represents a Small, “M” represents a Medium, and “L” represents a Large cushion.
CLEANING TIPS:
The manufacturer recommends the Eson 2 mask, headgear, and diffuser be washed in lukewarm water with mild soap for no more than 10 minutes each time. The mask needs to be washed each day, while the headgear and diffuser may be washed weekly. When rinsing all items, ensure the soap residue is gone. Allow the mask and parts to air dry away from direct sunlight.
Billie –
I’ve always loved fisher and Paykel. They make the best masks
Amandeep Singh (verified owner) –
I like your services